Maxima
ETA Certified
For outdoor and indoor use
STIROMOL Bazni is a one-component dry-type construction adhesive, made from hydraulic and synthetic binding agents, intended for gluing styrofoam onto mineral substrates.
STIROMOL Bazni, 25kg, is mixed with 5.5-6l of water and stirred until a homogeneous, lump-free mass is formed. Wait 10 minutes, then mix intensively again. The mass prepared in this way is ready for use and must be used within 2 hours. STIROMOL Bazni is applied to the thermal insulation boards (adhesive coverage should be at least 40%), and pressed onto a firm, clean substrate. On the glued thermal insulation boards, after 2-3 days, we recommend dowelling (6 pcs/m²).
Warning: STIROMOL Bazni is used only for gluing styrofoam boards. This product is not intended for reinforcing the mesh nor as a finishing layer.
Working temperature: The optimal working temperature is from +10°C to +30°C. It must not be used below +5°C, or in strong sun, wind, fog and rain. Under optimal conditions, freshly applied surfaces should be protected from atmospheric influences for at least 24 hours.
Consumption: From 3.5kg/m², depending on the surface of the wall.
Shelf life and storage: 12 months from the production date indicated on the packaging. Store in closed and undamaged packaging, in a dry and ventilated room.
STIROMOL Thermo Adhesive for Gluing and Reinforcing Styrofoam
LED Vintage Bulb M1
LED 20W Track Light
LED Vintage Bulb 2000K 3W E27
LED Vintage Mini Bulb 2700K 4W E27
Multi-purpose Silicone Tape
Silicone Flexible 16x16mm Channel for LED Strip
LED Vintage Transparent Bulb 2700K 4W
LED Wall Light M1
LED Night Light (1W) with Automatic Light Sensor
Rail 3Mtr for LED Strip 20x10MM R1
Stainless Steel Toilet Set for Bidet