STIROMOL Bazni Styrofoam Adhesive
LED Vintage Bulb M1
LED 20W Track Light
LED Vintage Bulb 2000K 3W E27
LED Vintage Mini Bulb 2700K 4W E27
Multi-purpose Silicone Tape
Silicone Flexible 16x16mm Channel for LED Strip
LED Vintage Transparent Bulb 2700K 4W
LED Wall Light M1
LED Night Light (1W) with Automatic Light Sensor
Rail 3Mtr for LED Strip 20x10MM R1
Stainless Steel Toilet Set for Bidet
Maxima
For outdoor and indoor use
CE
C2TE
KERAMOL Flex is a flexible tile adhesive based on hydraulic binding agents, specially selected aggregates, synthetic polymers and additives. It is intended for non-absorbent interior and non-absorbent exterior tiles that are installed onto absorbent floor surfaces. It is temperature-stable from -20°C to +70°C. It is recommended for use in bathrooms, kitchens, underfloor heating systems, balconies and terraces, i.e. in all situations where glued ceramic tiles are exposed to increased humidity and temperature change.
KERAMOL Flex, 25kg, is mixed with 7L of water and stirred until a homogeneous, lump-free mass is formed. Wait 15 minutes, then mix intensively again. The mass prepared in this way is ready for use and must be used within 2 hours. The surfaces on which the adhesive is applied must be load-bearing, cleaned of dust, grease and other impurities. Larger unevenness is filled with KERAMOL Flex adhesive one day before installing the tiles. Before applying the adhesive, the surfaces are primed with a suitable MAXIKRIL primer, depending on the condition of the surface. If gluing "tile on tile", the surface is primed with MAXIKRIL Ceramic primer. The adhesive is applied with a notched trowel, so that for indoor works at least 65% of the tile surface is covered with adhesive, while for outdoor works the adhesive is applied over the entire tile surface. The tiles are placed on the applied adhesive while moving them left-right, up-down. The gaps between the tiles are filled after a minimum of 24 hours with FUGALIN grouting compound. After installing the tiles, the tiles and tools should be rinsed immediately with water.
Working temperature: Works should be carried out at temperatures from +5°C to +30°C. Weather conditions can affect the curing process.
Consumption: From 2-5kg/m² depending on the quality of the prepared surface, the technique and the method of applying the adhesive.
Shelf life and storage: 12 months from the production date indicated on the packaging. Store in closed and undamaged packaging, in a dry and ventilated room.