GLETOLIN Interior Wall Filling Compound

GLETOLIN, 25kg, is mixed with 10l of water and stirred until a homogeneous, lump-free mass is formed. Wait 15 minutes, then mix intensively again. The mass prepared in this way is ready for use and must be used within 24 hours. Wall surfaces must be load-bearing, cleaned of dust, grease and other impurities. Before applying GLETOLIN, the surfaces are primed with a suitable MAXIKRIL primer, depending on the condition of the surface. The prepared mass is applied to the wall surfaces using a steel trowel or a stainless-steel painter's spatula. After drying, each applied layer should be sanded with sandpaper. The drying time before applying the next layer, or before sanding, is at least 12 hours under optimal conditions. The maximum recommended total layer thickness is 5mm. After use, tools should be rinsed immediately with water.