LED Vintage Bulb M1
LED 20W Track Light
LED Vintage Bulb 2000K 3W E27
LED Vintage Mini Bulb 2700K 4W E27
Multi-purpose Silicone Tape
Silicone Flexible 16x16mm Channel for LED Strip
LED Vintage Transparent Bulb 2700K 4W
LED Wall Light M1
LED Night Light (1W) with Automatic Light Sensor
Rail 3Mtr for LED Strip 20x10MM R1
Stainless Steel Toilet Set for Bidet
LED Strip 230V 4200/6000K
Maxima
FUGALIN is a water-repellent, vapor-permeable, elastic, fungicide-protected grouting compound that adheres excellently to surfaces and is resistant to scratching. It is intended for grouting ceramic and glass tiles, mosaics and stones for indoor and outdoor works. It is used for both wall and floor surfaces. The maximum joint width must not exceed 8mm. Due to its exceptional technical properties, FUGALIN is suitable for use in bathrooms, kitchens, as well as in interiors with underfloor heating systems. FUGALIN is produced in different shades, according to the MAXIMA grout color chart.
FUGALIN, 2kg, is mixed with ≈600ml of water and mixed well with a stirrer. Wait 5-10 minutes, then mix intensively again. The mass prepared in this way is ready for installation and must be used within 2 hours. FUGALIN is applied with a rubber grouting trowel, diagonally to the direction of the joint, so that it is pressed into the joint. The surface being grouted must be dampened beforehand. After application, after approximately 10-15 minutes, the entire surface of the tiles and joints is wiped with a fine grouting sponge, and then polished with a dry cloth. Water repellency of FUGALIN is achieved 5-7 days after installation. For tiles that are highly porous and rough, it should be checked beforehand how they are cleaned. If the adhesive used to glue the tiles is not completely dry, the joint color may change. The tiles can be walked on 12 hours after FUGALIN has been installed. After use, tools should be rinsed immediately with water.
Working temperature: The optimal working temperature is from +10°C to +30°C. It must not be used below +5°C, or in strong sun, wind, fog and rain.
Consumption: From 0.5-1.0kg/m², depending on the width and depth of the joint, as well as the format of the tiles.
Shelf life and storage: 24 months from the production date indicated on the packaging. Store in closed and undamaged packaging, in a dry and ventilated room.